View Full Version : New exaust system
Garlo
14th July 2004, 04:03 PM
Hi i am new to these forums nice to meet you all,
just got my NX-R a month ago now and looking to give it more power, after reading i have come to the conclusion that a new exaust "the whole works" is the the way to go.
i am wondering where to got it done, i live in Newcastle area and wondering for some sugestions on where to go, for have been to Lillfords in Thornton and the muffler man in Newcastle and other sugestionsbefot i make a decision,
also wondering where can i get a new parcel tray cause my is broken or where can i get it fixed.
fahootie
14th July 2004, 04:37 PM
www.wyongspares.com.au
has a 92 NX for your parcel shelf ....thats not too far from Newcastle.
Garlo
14th July 2004, 10:02 PM
thanxs for that. i'll ring them toommrow
sicknx
15th July 2004, 11:45 AM
i got a parcel tray... but im in brisbane :P
NXT51
15th July 2004, 12:06 PM
& I might want it :p
Sp3ctre
15th July 2004, 05:06 PM
someones looking into wrecking an exa in buy and sell i think, check that outfor a parcle rack
wheelspin
15th July 2004, 06:11 PM
Welcome Garlo, it's always good to see new NX owners :)
What have you got planned for your exhaust?
NXR20T
15th July 2004, 11:12 PM
Im not too far from Wyong and I work in newcastle, so if you want it brought up let me know, also if you are after a nice exhaust system and dont want to pay too much, there is a bloke in newie who will do full systems headers inc for around the $600 mark I think, ask on pulsar.org plenty of newie boys there, cheers.
Samcubus
15th July 2004, 11:15 PM
try liverpool exhaust, mad nnnnS and they know wat there doing!
http://www.liverpoolexhaust.com.au/
Garlo
16th July 2004, 11:57 PM
I rang up wyong spares and they dont have it anymore but they do have other parts like engine stuff.
and wheelspin i am thinking of geting a hole new exaust system extractors, cat and cannon the hole works.from the 2 place i tried it is at least over a grand.
also i am going to lower it eather doit my self or get it done at a shop i am looking at geting a set kingsprings, how hard is it to do it "have friends with alot of experience with cars".
a little bit of info about my car since i am a newbie,
a 92 NX-R
got it with a 150000+ k's
all stock "except for the broken parceltray"
new breakes and tyers
with a alpine cd player "Model no 7807" in it *actualy it is up for sale*
it even had an old hands free car kit,
rego to december
got it for $6700
sicknx
17th July 2004, 11:42 AM
thats a bargin for 6700 well done :D
Garlo
17th July 2004, 07:48 PM
on the mod side of it i am thinking of takeing out the driving lights, i think they look a little crap the way they are mounted and replace them with others and house them further in the gard so they dont stick out
Lexx
20th July 2004, 06:12 PM
How much extra power do extractors give you? Is it much?
I'm utterly pisd off, today a cop pulled me up and did me for "failing to give way".
He was way away from me and shot up behind me, i rekon he was speeding cause i'm not idiotic enough to pull out on a cop car.
Cops in new zealand are extreemly harsh on young guys with quick little cars, always pull you over on the off chance they will get you on something like the otherday when i was in a mates v-tec, doing the speed limit and driving rather sensibly and they flashed us and gave the car the full inspection to see if it was all legal... PIGS!!!
dattofiend
20th July 2004, 08:03 PM
If you're putting a stereo in I can make you up a custom parcel shelf with a set of 6x9s in it... not too expensive, something to think about
Powered by vBulletin™ Version 4.0.4 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.