What the F#%k

[Nugget]

I was all set to put my sub and ampin today but i want to put the amp under the seat, but the bolts holding the seat down are not normal hex bolt bolts there star shaped does anyone know where i can get a key for these bolts. Its putting back my doof doof.

[AdrEXAline]

a hex socket still gets them off
well it did for me

[Master Yoda]

hey 16 rmc,

you can use normal socket to get the bolts off

can't remember the size though

-Mike

[Honda_Hater]

I used a 12pt socket, but I can no remember what size

[Exaterrestrial]

i'm switchin my seats atm and u need an E socket which u can buy for a hardware store, a normal socket will do it most of the time if ur careful but u risk treading the bolt, personally i reckon if ur gonna do a job u better do it right so i ordered in the socket, cost me 20 bucks... just my 2c,
ET!

[WhitePulsar]

i hate those bolts. i've wanted to take my seats out a few times now but the damn things have hualf the 'teeth' on the heads broken off, so i can't really do dick all about it. If i ever get them out, normal bolts are gonna go in.

[Nugget]

I might try and find a smaller bolt/screw to hold my sub in the box, so no theving basted steals it

[AdrEXAline]

eek! $20 fer a socket ...
sorry to tell you after you already ordered it ... but you know those interchangeable sets you get for drills? with the black plug in tips?
well the socket that holds them is a PERFECT fit. it's 1/2 way between 2 other metric sockets. and you can pick up a whole set for about $6 at big w or hardware stores

looks like this ... i think it's 1/4 inch socket...

[NX EXA]

The bit you need is called a star-hex. Any local hardware store should have it.

[TTriX]

or inverted torx...but an 8mm socket works just fine as long as you havent stripped the points off yet-hehe
T