PDA

View Full Version : 1983 dash brisbane



Hat
26th March 2003, 10:16 PM
does anyone know where i can get a 1983 dash
(instruments ) and how does it come out :confused: :help:

BENRYS
27th March 2003, 12:43 PM
near boostinhard, there is a wrecker that has plent of n12's....

check that out...

Nugget
27th March 2003, 02:57 PM
Originally posted by Hat
does anyone know where i can get a 1983 dash
(instruments ) and how does it come out :confused: :help:

There is a wrecker where i am they have 2 n12 exas and one ET pulsar they have the same dash, When i bought one for my ET of them it cost me $55.

Im only going buy me ET pulsar but i think they are the same
Pull out the dile that dims yoy dash lights above that there is a screw undo that same on the outer side, i cant member if there is any on the top of the dash, it sould just lift out, you will need to pull the speedo cable out and two clumps of wires, to get it back in you will need to discloate your wrist to recomect the speedo cable, man if I could do it when i was 16 im sure you will be fine.

The number for the wreckers is
Redcliffe Wrecking co
32845102
Address
9 Robson road
Clontarf

This wrecker has one ET and one Exa
Narangba Wrecking co
38881316
Address
Cnr Mcphail & Old Gympie roads
Narangba

boostinhard
27th March 2003, 09:03 PM
Hey,
have a look at the link in hte top right hand corner of your screen "Pulsar Parts" have heaps!

There are a few simple screws holding them in. Just start by taking off teh dsah surrounds and you'll see teh ones that hold the dash in. Undo them and then pull out the speed cable (and all the electrical plugs) and its out!
Sam