PDA

View Full Version : power estimate?



T2Exa
28th April 2003, 04:11 AM
Hi all,
I was wondering what sort of power should I be expected out of my exa with the following mods :

T25 off 300zx (running 0.45 bar)
lightened flywheel
pod filter with cold air induction (no cold air box)
2 1/2" from turbo in to RSR muffler

cheer

Nisman
28th April 2003, 10:28 AM
probably not a great deal more than standard, say 120hp at the flywheel (100hp standard)
upping the boost is where the big gains are.
lightening a flywheel will pretty much only result in 2 things from what i have experienced, quicker reving, and lowered torque curve.
however the exhaust and pod filter, along with the bigger turbo would have probably given you between 10 and 20hp at the wheels

boostinhard
28th April 2003, 01:03 PM
Hey,
I would say around the 70-75kw at the front wheels mark. Depends on what condition your engine is in aswell. A cooler and more boost will take advantage of your pod, exhaust and larger turbo even more... This could get you up in the vicinity of 90kw-95kw at the front wheels - a fair amount in such a light weight car
Sam

T2Exa
28th April 2003, 04:48 PM
Hey,

The only reason I want to know my car estimate power with that setup is because I have a power chip and cooler line up for my next mods and wanna know the power gain from them

anyway, cheer

boostinhard
28th April 2003, 09:49 PM
Hey,
hmm - forget the poer chip... Waste of time. Spend the cash that you saved from the chip on a better cooler.
Sam