B13 Clear Side L.E.D. blinkers - $65(Post Inc)

[MrBoom]

$65 Postage Inc. Australia Wide
Sydney pick-up available($60[-$5 Postage])

http://adam.ezy.com.au/temp/nx_blinkers/blinkers.jpg
http://adam.ezy.com.au/temp/nx_blinkers/blinkers_installation/blinkers_on.jpg
http://adam.ezy.com.au/temp/nx_blinkers/blinkers_installation/blinkers_front.jpg
http://adam.ezy.com.au/temp/nx_blinkers/blinkers_installation/blinkers_side.jpg
Dimensions 100mm x 37mm(Same as stock ones)

http://adam.ezy.com.au/temp/nx_blinkers/blinkers_installation/package_front.jpg

http://adam.ezy.com.au/temp/nx_blinkers/fitting.jpg

Simple installation, just unclip your stock ones, then you will see the stock globeholder(which is holding a wedge style globe).. pull out the globe, and simply plug in the Wedge plug of the new LED blinkers(as pictured above).. then stick the blinkers to ur car(blinkers come with adhesive backing, designed to withstand weathering)..
Check out post #3 for installation write-up

Post any questions you may have here.. PM me for my bank details, and for purchases..
and here is the EOI thread, some extra info in there:
http://forum.nissanexa.com/showthread.php?t=27696

[SXCNXR]

nice adam.. atleast ur doin something for tha NXs...
ill contact u soon bout these lights.. after i payed for rego

[MrBoom]

Installation Guide:

Note: this installation guide was performed on a Mitsubishi Outlander. Things may not look identicle when your doing it, but im sure you will be able to figure it out.. it took me about 2mins to do this(and i was taking pics too..)

Step1: Pull/push forwards/backwards on the blinker, in my case, i pulled it towards the headlights. you will feel it move, and when it does, lift outwards, and you should be able to clip out the stock light.
http://adam.ezy.com.au/temp/nx_blinkers/blinkers_installation/step_1.jpg
http://adam.ezy.com.au/temp/nx_blinkers/blinkers_installation/step_1_2.jpg

Step2: Twist the globe holder, and it should release itself from the stock housing.. then you will see a globe sitting in there.. just pull it out..
http://adam.ezy.com.au/temp/nx_blinkers/blinkers_installation/step_2.jpg
http://adam.ezy.com.au/temp/nx_blinkers/blinkers_installation/step_3.jpg

Step3: Simply plug in the blue wedge plug(on the end of the new blinker) into the globe holder(connected to the car).. at this stage, you should test your hazard lights or something, to make sure the L.E.Ds are flashing, if they are not, simply turn the blue wedge plug 180 degrees, and then test again..
http://adam.ezy.com.au/temp/nx_blinkers/blinkers_installation/step_4.jpg

Step4: when its all working, simply clean the area around the blinker(i.e. the front quarter panel) using some wax & grease remover, or turps, or something like that.. and stick to the panel, using the adhesive which is supplied..

Note2: Back of the package also has fitting instructions.
http://adam.ezy.com.au/temp/nx_blinkers/blinkers_installation/package_back.jpg

[dsp26]

Hey MrBoom,

I was wondering if you can get these but in a slightly bigger rectangular shape.

This is because if you look at the JS kit in my avatar, the fucking ghEy truck indicators that JS sold me for an additional $30 look fucking ghEy and i think are too low to be legal. (Noone ever sees me indicating on roundabouts until i almost hit them).

The reason i want rectangular ones of the above light is because the base is flat which means i can just stick it on the kit just under my headlight.

Thanks in advance.

[MrBoom]

yeah mate, no problem..
i can get all sorts of lights for alot of different cars..
perhaps something similar to the n13 parkers im selling might be an option for ya..
http://forum.nissanexa.com/showthread.php?t=27090

check your PMs.. we can discuss it there..

[MrBoom]

only have 1 set left.
will not be stocking these in bulk anymore, so the price will be going up to roughly $80 postage included, or $75 pickup..

if u were thinking about getting a set, now is the time!

[rob_o]

These arent very bright in the day, but look cool at night! Thanks heaps MrBoom... awesome!!!

Before
http://img13.imageshack.us/img13/7922/nx0088hm.jpg


After
http://img523.imageshack.us/img523/3492/lowres9gv.jpg

[Dustie]

Thanks Adam, they look awesome :)

[SXCNXR]

so u still ahve that last set of lights?

[lil_lay]

hey mr.boom good job man but if u can memba BLOOD's thread on puting on the VX commodore clear indicators that really workd good for me. i just wana know if i hav 2 use silicon or sumfing 2 get ur ones stuck on the sides aswell?

[MrBoom]

nah, these are self adhesive, dont need to use silicon, they stick like crazy..

[SXCNXR]

so u still ahve that last set of lights?


ADAM??? do u?

[Dustie]

I believe I have the last set :P

[MrBoom]

lol, simsta is right..
sxcnxr, pm me, ill work something out with ya..

[SIK__M8]

can you get the clear corner lights for the n13 the ones beside the pop ups they would look sweet and match the altezza parkers im gettin off ya

[HiToRiKo]

would i be able to fit these to a n12?

[MrBoom]

more than likely, but this sale is long gone anyways..
more styles availabe on my website, but higher price $75 + $9.95

http://www.ozkits.com.au/site/1446035/page/775587

[Impacter]

Any Perthies that want these give us a bell maybe we can get a few for le bit cheapys, postage that is...

[Whytie]

do all of those kits on the website hook up in the same way??

I.e. could i use any of them? There seems to be a very different styles i'm interested in.

[Stunts]

id be up for a set Impacter...

[MrBoom]

yeh, they are all plugged in the same way, and fitted the same way. just make sure the dimensions of the light you choose, will cover the hole that is in your fender.