My Cars Pics! [UPDATED!!!]

[SeGGy]

Hey hows it going all
i finally got a digital camera and my new 17inch rims. i know it needs lowering (will b in 2weeks) prolly just even it out. Tell me what you think so far as i am only 15 ;)

thanks alot, enjoy!


also considering the jetspeed kit or GP front skirts, will they go on it well you think? and CA18DET money is comming in...guna try n look for one in about 2 months
:cool:

[SoNiX]

hey, niec ride man...luv the rims...they the same as silvexa's??? and would look nice with a kit...the gp lips are sweet, but i dont htink you can mount them straight on the stock bar..i think the gp bar is a bit different, and so ya need to get the whole gp front bar...but ask warren, he'd know more about that...15...with 3 years of tlc, this is gonna be a mint ride..:chuckle: :chuckle:

[GPexa]

they still have a few GP lips floating around the place, that do fit to the standard EXA bar, but fit more snugly on the GP bar which they don't produce anymore....

The only difference between the standard front bar and the GP front is the GP bar is slightly curved to accomodate the lips nicely...

[Matt]

Looking good mate... hows that new filter going??

[BENRYS]

cool... well thats benrys doin there, the neons and pod... oh yeah i rule!!! haha, na should be wild

seggy, i am gonna wait till i get the turbo before a zorst

[SeGGy]

the pod well, the power is brillaint top end, i think its put tha tuing outa wack, no worries tho, gettin it serviced next week when i get paid. oil change n shit and tha cam shaft timing is off so it will b put back into place so its goin good:). yeah special thanks to benrys for tha neons/pod, looks fukn mad and thanks for matty for always being there with a helping hand. Cold air intake will be my next backyard mod, gunna get it lowerd aswell 2nd week of hollz.
I'm not to sure about the GP front, only coz its pretty expensive for what it is. wait for the DET then go body i rekkon.
thanks for the postive feedback bout my car :)

sonix i think they're very similar to silvexa's. but mine are 2 or 1 inches bigger and iv got the low profile tyres, a mate said he could fully respray em to get ridda all tha scatched for $100, might consider chroming them up...if theres such a thing

tha neon pic is prtty crap cozza tha flash on the camera..u get tha idea tho

[XXFearThisXX]

hey fully sik bro that pic u attached called neon outside or whatever.it looks like a horror film pulsar! it looked like a bloody exa in the dark ready to run someone over..:bat: ...lol

[SeGGy]

yeah heh looks wayy better in person, its way better inside with my new mats.. gives it a darkred/black effect @ night..could almost name my car tha vampire exa or devil...numba plate could b somethin like [EXA-666]

[SeGGy]

orite i jsut went sick with the digi camera...so i made a bit of a colection of pics!
enjoy!!!!!
:mario:

[Android 360]

i hope u realise how lucky u are owning a mint exa like that at the age of 15!

did u buy it or did ya folks?

[SeGGy]

dad bought it for me :)
we have an agreement...he can take it for a drive..he helps me with mods;)
gettin a series 3 front badge tomorrow..orderd one in :) should b sik
next mod....TURBOCHARGER!~!!!!!
:luigi:

[Matt]

Was it the one like benrys' with the solid disc behind NISSAN, or a later one with the hollow ring?? Im thinking of "getting hold of" a later model badge. Has anyone seen how good the new holden badges look on the old VL commodores? I mean crap car but modern badging kind of brings the car up to date...

[SeGGy]

it should be the same as Benrys' ...i told him N13..series3 EXA front badge....ill get it wen my dad gets home...since he went and picked it up. should be good :)

[Android 360]

i reckon the exa looks betta with no badges esp on the front... the one on the lite cover is ok tho

[SeGGy]

yeahh i first had that impression...but now that iv seen more with badges..its grown on me

[SeGGy]

iv got the badge
it is tha same is benrys'..so its a genuine series 3 exa badge...
only problem, u gotta put holes in ur bonnet to get it on , i stupidly didnt realise this, but im prolly gunna get it put on by a mate tomorrow so should b orite..hopefully:hitwall:

[SeGGy]

this pic isnt to bad with the neons on..like always..flash kills it
plans for my car have changed again and again
after i long talk with trav, i have decided not to get a body kit (incase u didnt know i cant turbo n e more..longarse story)
i agree with the exa wasnt made for a body kit, hence i will be lowering the car and getting some chips resprayed (gettin back done this week) and dings taken out (only like 1) however b4 i get it lowerd im gunna get a sik sound system in - subs n shit
i have a mate who can get me some cheap good stuff..soo ill see wot he can do for me
as for the badge its not on yet, when dad gets back ill get it done
:D
laters!
seggy:luigi:

[Matt]

DONT PUT HOLES IN YOUR BONNET!!!!

Just cut the plastic pins off the badge and stick it on man!

[Jessie]

:eek: :eek: Noooooooooooooooooooooooooooooooooooo, not the fluffy dice. :help::help::help::help::help::help::help:

AAAARRRRRRRRGGGGGGGGGGGGHHHHHHHHHHHHHHHHHHHHHHHHHH HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH HHHHHHHHHHHHHHHHH.

Jessie :sexy:

[SeGGy]

matt - yeah i thought about that, dad thought it would come off to easy...but i spose its alot easier to do, what do you recomend to sticking it on? double sided tape? supa glue?

jessie - maaiishhtt.. i loiike mah fluffyyyy dyshhhh

thanks for all ur positive feed back on my caR!!!!!!!!!!!!!!!!