*** IN STOCK *** N13 White Face Dash Kit - $60

[MrBoom]

http://www.adam.ezy.com.au/ozkits/forumlogos/blue_whitebg.png
www.ozkits.com.au (http://www.ozkits.com.au)

$60
$4.95 P&H Aust Wide

These are ready for production pending the all clear from me.
They are the same as the b13 ones that im also selling, to read up on them, please check out: http://forum.nissanexa.com/showthread.php?t=31370

In the following pics, please note that the colours are not exact, they are printed and shown this way for illustration purposes, to clearly show what parts are red, and what parts are blue. A sample of the way they will look at day time can be viewed here: http://www.adam.ezy.com.au/temp/DASH/dash_nx.jpg
as you can see, the colours are alot darker, and look alot better.

Here is a pic of a sample printed on paper, and fitted:
http://www.adam.ezy.com.au/temp/dash/exa/fitted_template.jpg

Here is a pic of the digital artwork:
http://www.adam.ezy.com.au/temp/dash/exa/exa_dash_artwork.jpg

These kits will be complete replacements for the current dash faces, they are made of plastic, professionaly screen printed, professionaly cut out by a router, and only emit light through the coloured areas(i.e. the lines, and the numbers, NOT the white areas)

Here is a sample illumination pic of an r32 dash, made from the same supplier:
So you can see how the colours illuminate at night time.
http://www.adam.ezy.com.au/temp/dash/dash_illumination.jpg

[he.]

just grate, though information about install process would help.
do the original dials need to be removed, or these just stick over the top? are they very bright using original globes?

[Stevoss]

can you get some pics of it installed? im very interested but would like the example first :) also some ppl have different colour schemes can you have them with red instead of the blue?

[mark00001]

its not hard to install... taking it all apart is just screws for the dash.....

curious tho, can we get diff colours, and/or custom prints made up, with the white as the base?

[dj_dex_]

hell yeh that would be sick as like ur thinkin mark :funnylarf

[Myth]

id be keen, i just wanna double check something..... Do they cast shadows when u have ur lights on? Ive seen some on ebay, and when they light up, there is shadows from the mechanisms and they look shithouse. If not - sweet.

[Chocco]

they dont look that bad but in my personal opinion they kinda look tacky only havin the dials while and not the entire cover. Id be keen if it was totally white

[exa-182]

just dont leave them in the heat for too long.....
mine warped... but they do look awsome....

[Clown]

Good work Adam.
Look much better than the all-white ones on Ebay.

(BTW: Got the front bars today, thanks dood :D)

[MrBoom]

ok, first post updated, was in a rush first time i posted, so extra info has been added.

he. : they are very simple to install, a similar installation process can be found here(just ignore all teh parts about scanning etc), http://www.nissanexa.com/mods/n13/whitedials/index.html
they will be bright enough with regular globes, the sample illumination pic is using regular globes, but getting some LED wedgle globes would be a good idea also..

Stevoss: sorry, the only install pics are the test ones, reason being is, they are just about to hit production, and be available in a few weeks, ive posted this up early, because i am about to start up a group buy probably.. as for colour schemes etc, no, reason being is these will be printed in a lot of 100.. so everyone has to have the same ones.

Mark00001: sorry no, read above

Myth: NO! do not confuse these with cheap ebay versions which are just laminated paper, printed from someones house, look at the sample illumination pic, and you will get the idea on what they will look like at night time.

Chocco: sorry, this is the style chosen, in my opinion, it looks better this way, everyone has their own taste, lol, but there is a guy on ebay who does ones similar to this which are totally white like you would be after.. more expensive than me though :)

Clown: i agree, hehe

[MrBoom]

Please Click Here!! (http://forum.nissanexa.com/showthread.php?t=32064)

[FapFapFap]

just dont leave them in the heat for too long.....
mine warped... but they do look awsome....


Mine did that in the middle of Janruary, car cover kept all the heat in, warped so much the tacho needle didn't move.

[Chocco]

hmmm $65 Dorrah i spose i can give that to ya in exchange of some white dials :P

[MrBoom]

couple photoshops regarding having the EXA logo there
blue looks WAY better..
and reason there isnt the little tag on the "e" is for copyright reasons, im not in the mood to be sued :)

please go vote here!! http://forum.nissanexa.com/showthread.php?t=32064

http://www.adam.ezy.com.au/temp/dash/exa/exablue.jpg
http://www.adam.ezy.com.au/temp/dash/exa/exared.jpg

[Stevoss]

put me down for 1 if it is in blue and i will have the money in a few weeks :)

[Rockez]

Down like a clown.

Have voted in the other thread.

[mark00001]

yeh i want the blue one, put me down, wish it had the thing on the E tho!.... sure u cant get sued for that considering the shit thats on ebay!

[mark00001]

if it looks like this at night, then no.....


http://cgi.ebay.com.au/Face-Lights-Up-White-NISSAN-EXA-DIALS-Free-Post_W0QQitemZ4641089745QQcategoryZ32063QQrdZ1QQcm dZViewItem

[MrBoom]

mark, read the first post, look at the sample pic..
the ones on ebay are fake EL dials, basically its just laminated paper, cheap shit..

[mark00001]

haha reading???... ok man, when will they be ready?...

[MrBoom]

within 2 weeks

[SeGGy]

im in

[mark00001]

yeh two weeks was one week ago!..... wats happenin man?

[MrBoom]

haha, my bad dude, was meant to be 2 weeks ago, but my supplier has some other REALLY big orders, one of which is myne as well, for an MR2 group buy im running..

these are being made, have already been screen printed, and are going to the cutters shortly, so shoudlnt be too long, sit tight :)

[mark00001]

cheers man, was just interested

[Stevoss]

still kinda interested but wanna see them in an exa fully installed first.

[TRaNCe]

^^^^ Mee Too

[opindown]

i am interested (very interested)

would like to see them in a exa installed if any one has any pics

opindown
:bat:

[Stevoss]

any news? pics of installed?

[kizza193]

sum 1 wantas to by them 4 me ill use mi car as the donner car:teeeth:

[MrBoom]

still waiting on the cutters.
they are flat out with doing signage for 30+ Telstra shops

[*~*sexxa*~*]

does anyone know of anywhere i can get a white dash face for a nissan exa n13 91, i want to do my interior fully white with pink dash lights and black neons?

[mark00001]

wait for these ones like us! as they are by far better than the dodgy ebay ones we've seen!.....

[Simon]

Whenever these pop up, Ill be intrested, they look sweet :-)

p.s. I prefer the non-logo'd one to be honest.

[EXA-lirate]

put me down for a white one as long as it comes with the blue EXA logo on the dail.!

[woff_88]

yer man me tue as long as its the blue exa on the taco

[Extra]

hey sounds good ill get a set of the plain ones if you can do it, if not the blue ones... ps, im a printer, so if anyone needs stickers and stuff pm me... ill be able to do cost rates for members...

[mark00001]

guessin these aint comin?

[MrBoom]

they are definately coming, because ive already paid for them..

these get printed along with other style dials i sell, so for example, on one sheet, there would be the exa dials, the 180sx dials, and mr2 dials..
so that sheet(artwork) would be printed 100 times..

so i have 100 copies of these dials, but all uncut..

the sheets are sitting at the cutter waiting to be cut, but the cutter is far too busy to do them right now, so im stuck here waiting..

[Extra]

what`s he cutting them on, a platen?a cylinder? have you got a cuttin form? ill cut the damn things for free just so i dont have to wait any longer... b13`s get all the good stuff first!! god damn got no rice n13`s...:eyerotate

[MrBoom]

cut with a router of some sort, using CAD.. so its exact..

[Extra]

ahh... digital printers.. good stuff.. pm me when there done plz.. cheers..

[Loki_Melb]

how far are these off still? (don't want to sound like I'm harping.. just no word in a week or two :) )

[MrBoom]

ive been promised within the next couple months..

but hey, something always goes wrong, lol..

[Loki_Melb]

that's cool. I'll have cash then :) just paying rego on my car... so that's always fun on the wallet

[vi3t]

well im down for a set, i like the blue exa logo its SEXXXXXXXX!

[vi3t]

if thats what ur getting right? -_^?

[finno]

put me down for sum aswell just got white and blue retrim will look nice cheers mate pm me when there in and payment details

[MrBoom]

guys, these may be available next week sometime..
should be very soon, im eager to see the finished product, keep an eye out in this thread for updates!

[KaiShin]

Adam can you get the full faced ones?

[HiToRiKo]

any chance of getting N12 ones made up?

[MrBoom]

hitoriki, maybe in the future..

kai, nah, just get them off ebay...

[blocka]

how much deposit would i need, ill send it through with the deposit for the kit next week!

[MrBoom]

just full payment upfront..
$65..
just wait till they are in stock..

[KaiShin]

Ahh okay Adam...
Rather support you than some ebay punk!
:p

[wingnut]

ebay full face ones are good kel you can get custome stuff on them!
i perfer the full face to otherwise i'd get some of adam

[StaTiK]

yeh... thats what i like about the ebay ones :) no offence meant to you adam, but the white faces in the arrangement you got coming out look like its just got white paper glued over it... lol. sorry man, but i really dislike it. i think the full white face looks more fitting and clean..

ofcourse they dont have the same quality as your ones do, and it is personal preference.... some mofo just needs to make up purple cluster faces... lol

[MrBoom]

yeh, wait till you see them in real life, then it wont look like paper stuck over it :P the one pic fo the dials fitted to a cluster IS actually just a paper print out..

anyways, im pretty sure the guy on ebay can also do purple ones for ya man..

[jakeyboy1989]

are these now in stock?

[StaTiK]

Adam will post when his items are in stock. i dont see why he would hide the fact he has Exa parts in stock, when he could be selling them..

Seriously, i wish people would think sometimes. All his threads seem to say in them is "do you have this in stock?" "do you have that in stock?" everytime he posts the same thing... CHECK THE FUCKING WEBSITE HE RUNS, AND IF HE HAS ITEMS IN STOCK, HE WILL TELL US!!!

Also, Jake, you dont even have an exa, nor do you have one lined up? focus on getting the exa 1st mate :D - id like to add, that wasnt an attack at you, i just start feeling sorry for Adam when he gets asked 20 times in each of his product threads the same questions.

And if your not interested in buying at the moment, why would you want to know when/if they're in stock?

[jakeyboy1989]

i am interested in buying at the moment.. iv already started gathering stuff for the car.... i was just asking to see if he knew cos in a previous post he said theyd be in 'next week' thought i may have missed something... sorry for askin

PS im actually probs buying one on thurs... il let you know...

[jakeyboy1989]

mate you know i edited and changed my comment... i apologise for bringing that into it... but since i dont know you, that was the only thing that made sense as to why you would be so harsh.... lets just start a fresh and forget it all, yeah?

[StaTiK]

sounds good to me bro.

[Extra]

is this still going on??

[cypress_blaze]

you know, stat, I just checked his website, and (maybe I'm blind as fuck) but I didnt see any for the n13.

[MrBoom]

yeh sorry guys, i havnt added them to the website as i have been having a bit of trouble with my online store..

i have the sample set being sent to me right now, so hopefully in a couple of days(IF it was posted today) ill have a set installed in my car with pics etc..

then ill have them for sale shortly after

[MrBoom]

ive just recieved the first set of cut dials, and i must say, they look awesome!
ill probably get them fitted into the car tomorrow or very soon, and get some pics up.. will be for sale very very soon..

[blocka]

might have too add these too my order :D

do they have the nissan EXA logo?

[MrBoom]

here is a picture of the final product.
this was a test cut out with the router so they arent cut too neat, also because the router was blunt, which is why u can see some white bits where it shouldnt be(e.g. the blinker arrows)

the copies that i will be selling will be perfectly cut out..

http://adam.ezy.com.au/temp/dash/exa/first.jpg

[Mazikowski]

damn, really wish you could get some mph ones for the USDM cluster... would be beyond kick ass!

[Extra]

are these the ebay ones iv heard about? it says there plastic not paper...
i dunno...they look the same as yours (MR Boom) but only the other way round?

http://cgi.ebay.com.au/Nissan-N13-EXA-white-face-dials-gauges_W0QQitemZ300076202268QQihZ020QQcategoryZ102 561QQrdZ1QQcmdZViewItem

[MrBoom]

yeh, thats my supplier, though he is not supposed to be selling them until he has completely supplied me, i think it may be a mistake.. in either case its more expensive than myne, so just wait for myne :) :P

[Extra]

i will, i will, just seen someone cutting ya grass is all...

[MrBoom]

thanks for the alert champ :)

[wingnut]

yeah he's had them on ebay for awhile now!!

[MrBoom]

ok, im stocked up guys! so anyone who wants a set, just let me know!

[WantEXA]

these looks sweet man... do you plan on always being stocked up on these bad boys? would like to see the finish product fitted before i bought some.. i owe money for my car but you know that can wait.. these gauges r sweet lol

[blocka]

these looks sweet man... do you plan on always being stocked up on these bad boys? would like to see the finish product fitted before i bought some.. i owe money for my car but you know that can wait.. these gauges r sweet lol

When I get mine ill post up some pics

[MrBoom]

yeh, wantexa, plan to always have in stock.. i only have limited stock right now, so i dont wanna put a set in my car, seeing as its off the road, and ide prefer to give to customers..

blocka, youve already paid, pm sent

[MrBoom]

up on www.ozkits.com.au now, can be ordered direct, and payed via Direct deposit, Paypal, or Credit card

direct link:
http://www.ozkits.com.au/site/1446035/product/DASH-EXA

[Extra]

there in.. lookie lookie..
http://forum.nissanexa.com/showthread.php?p=477671&posted=1#post477671

[blocka]

Got my white style dials today and let me tell you, without even putting them in they are amazing quality and look fantastic! A credit to Adam, www.ozkits.com.au is where its at

[blocka]

http://i13.photobucket.com/albums/a300/sv5000r/IMG_6669.jpg
http://i13.photobucket.com/albums/a300/sv5000r/IMG_6670.jpg
http://i13.photobucket.com/albums/a300/sv5000r/IMG_6671.jpg

[mint]

Just ordered my set from your site.. can't wait to recieve them.

[ScottB]

you still have these?

[MrBoom]

sure do.. pm if you want some.

[BobsN13]

Will the dials fit the N13 Pulsar?
My speedo only goes to 200 and since I converted to the Exa gearbox the speedos out so it might fix the problem.

[ScottB]

it wont, its the diff ratio thats changed

[Roach419]

No chance for a US version???? I think these are awesome and fit my car well.....

[MrBoom]

nah sorry

[nxnewbie]

does anyone know if OZkits will deliver yto the states?

[MrBoom]

yes i do, but do not make MPH dials

[Swift4y]

I'm in I want those dials =D tell me who to pay and I'll pay as long as I get those dials!

[MrBoom]

pm sent

[tibinstein]

Is this still on the go, if so hook me up...

[MrBoom]

unfortunately out of stock, check back in a couple weeks

[tibinstein]

No worries...

[NYTRDA]

can u plz pm me when u have them in stock very interested

[Bardock_4]

Yesh also pm me as well as i can will buy em next pay day.

[SIK__M8]

can you make us some pulsar SSS n13 white faces?

[NYTRDA]

hey are these in stock yet????