Cannon Mufflers - Extractors - High-Flow Cats - more..

[MrBoom]

http://www.adam.ezy.com.au/ozkits/forumlogos/blue_whitebg.png
www.ozkits.com.au (http://www.ozkits.com.au)


Stainless Steel Cannon Mufflers
http://adam.ezy.com.au/ozkits/uploadedimages/xforce_logo.jpg
304 Grade Stainless Steel

$19.95AUD Australia Wide Shipping. Sydney Pick-Up.

Angle Cut Gold Seam - $180
http://www.ozkits.com.au/members/1446035/uploaded/XF0104.jpg
Available in:
4.5" Tip (http://www.ozkits.com.au/site/1446035/product/XF0104)
3.5" Tip (http://www.ozkits.com.au/site/1446035/product/XF0101)

---------------------------------------------------------

Angle Cut Gold Seam(Short Tip) - $180
http://www.ozkits.com.au/members/1446035/uploaded/XF0100.jpg
Available in:
3.5" Tip (http://www.ozkits.com.au/site/1446035/product/XF0100)

---------------------------------------------------------

Straight Cut Gold Seam - $180
http://www.ozkits.com.au/members/1446035/uploaded/XF0103.jpg
Available in:
4.5" Tip (http://www.ozkits.com.au/site/1446035/product/XF0103)
3.5" Tip (http://www.ozkits.com.au/site/1446035/product/XF0102)

---------------------------------------------------------

Angle Cut Seamless - $180
http://www.ozkits.com.au/members/1446035/uploaded/XF0106.jpg
Available in:
4" Tip (http://www.ozkits.com.au/site/1446035/product/XF0106)

---------------------------------------------------------

Angle Cut Seamless(Short Tip) - $180
http://www.ozkits.com.au/members/1446035/uploaded/XF0105.jpg
Available in:
4" Tip (http://www.ozkits.com.au/site/1446035/product/XF0105)

---------------------------------------------------------

Straight Cut Seamless - $180
http://www.ozkits.com.au/members/1446035/uploaded/XF0110.jpg
Available in:
4" Tip (http://www.ozkits.com.au/site/1446035/product/XF0107)
4.5" Tip (http://www.ozkits.com.au/site/1446035/product/XF0110)

---------------------------------------------------------

Straight Cut Seamless(Long Tip) - $185
http://www.ozkits.com.au/members/1446035/uploaded/XF0108.jpg
Available in:
4" Tip (http://www.ozkits.com.au/site/1446035/product/XF0108)

---------------------------------------------------------

Straight Cut(Doube Wall Resonated) Gold Weld - $185
http://www.ozkits.com.au/members/1446035/uploaded/XF0111.jpg
Available in:
4" Tip (http://www.ozkits.com.au/site/1446035/product/XF0111)
4.5" Tip (http://www.ozkits.com.au/site/1446035/product/XF0112)

---------------------------------------------------------

Straight Cut Seamless(Big Body) - $185
http://www.ozkits.com.au/members/1446035/uploaded/XF0109.jpg
Available in:
4.5" Tip (http://www.ozkits.com.au/site/1446035/product/XF0109)

---------------------------------------------------------

Low Offset Straight Cut Seamless(Big Body) - $195
http://www.ozkits.com.au/members/1446035/uploaded/XF0113.jpg
Available in:
4.5" Tip (http://www.ozkits.com.au/site/1446035/product/XF0113)

---------------------------------------------------------

Straight Cut Mega Cannon 8" Body - $200
http://www.ozkits.com.au/members/1446035/uploaded/XF0114.jpg
Available in:
4.5" Tip (http://www.ozkits.com.au/site/1446035/product/XF0114)

---------------------------------------------------------

Titanium Cannon Mufflers

Straight Cut(Blue Flame) Matte Titanium - $275
http://www.ozkits.com.au/members/1446035/uploaded/XF0117.jpg
Available in:
4" Tip (http://www.ozkits.com.au/site/1446035/product/XF0117)
4.5" Tip (http://www.ozkits.com.au/site/1446035/product/XF0118)

---------------------------------------------------------

Straight Cut(Blue Flame) Polished Titanium - $275
http://www.ozkits.com.au/members/1446035/uploaded/XF0115.jpg
Available in:
4" Tip (http://www.ozkits.com.au/site/1446035/product/XF0115)
4.5" Tip (http://www.ozkits.com.au/site/1446035/product/XF0116)

---------------------------------------------------------

[MrBoom]

Stainless Steel Twin Tip/Oval Mufflers
http://adam.ezy.com.au/ozkits/uploadedimages/xforce_logo.jpg
304 Grade Stainless Steel

Single Tip Double Wall Resonated - $200
http://www.ozkits.com.au/members/1446035/uploaded/XF0304.jpg (http://www.ozkits.com.au/site/1446035/product/XF0304)

---------------------------------------------------------

Twin Round Tips - $200
http://www.ozkits.com.au/members/1446035/uploaded/XF0307.jpg (http://www.ozkits.com.au/site/1446035/product/XF0307)

---------------------------------------------------------

Twin Round Tips Lower Offset - $200
http://www.ozkits.com.au/members/1446035/uploaded/XF0302.jpg (http://www.ozkits.com.au/site/1446035/product/XF0302)

---------------------------------------------------------

Twin Round Tips Lower Offset(Bigger Body) - $200
http://www.ozkits.com.au/members/1446035/uploaded/XF0303.jpg (http://www.ozkits.com.au/site/1446035/product/XF0303)

---------------------------------------------------------

Twin Square Tips - $200
http://www.ozkits.com.au/members/1446035/uploaded/XF0306.jpg (http://www.ozkits.com.au/site/1446035/product/XF0306)

---------------------------------------------------------

Twin Square Tips Lower Offset - $200
http://www.ozkits.com.au/members/1446035/uploaded/XF0301.jpg (http://www.ozkits.com.au/site/1446035/product/XF0301)

---------------------------------------------------------

Twin Upswept Tips - $200
http://www.ozkits.com.au/members/1446035/uploaded/XF0305.jpg (http://www.ozkits.com.au/site/1446035/product/XF0305)

---------------------------------------------------------

Twin Upswept Tips Lower Offset - $200
http://www.ozkits.com.au/members/1446035/uploaded/XF0300.jpg (http://www.ozkits.com.au/site/1446035/product/XF0300)

---------------------------------------------------------

Stainless Steel Twin Loop Mufflers
http://adam.ezy.com.au/ozkits/uploadedimages/xforce_logo.jpg
304 Grade Stainless Steel

Twin Loop Oval Muffler - $240
http://www.ozkits.com.au/members/1446035/uploaded/XF0002.jpg (http://www.ozkits.com.au/site/1446035/product/XF0002)

---------------------------------------------------------

Twin Loop Round Muffler - $240
http://www.ozkits.com.au/members/1446035/uploaded/XF0001.jpg (http://www.ozkits.com.au/site/1446035/product/XF0001)

---------------------------------------------------------

[MrBoom]

Extractors/Catalytic Converters/More..

Mandrel Bent CA18DE/CA16DE Extractors - $299
http://www.ozkits.com.au/members/1446035/uploaded/ca18de_exrtractors.jpg (http://www.ozkits.com.au/site/1446035/product/EXA-Headers)

[Ph3n0m3n0n]

done deal for extracots.

[PunchDrunkMonky]

Hey dude, do the extractors fit onto a DET??

[MrBoom]

why would u want extractors on a DET? ude need a turbo manifold champ.

A RWD Manifold would do the trick for you, from cars like, s13 silvia, 180sx, etc.
though you may need to get your fans moved.

[CA18DEpow3r]

Mandrel Bent CA18DE/CA16DE Extractors - $299


how much would it be to send thos to USA??

[PunchDrunkMonky]

why would u want extractors on a DET? ude need a turbo manifold champ.

A RWD Manifold would do the trick for you, from cars like, s13 silvia, 180sx, etc.
though you may need to get your fans moved.


Ah Ha, no worries thanks dude

[NIX EXA]

hey if i was to get a pair of extractors how much would postage be to victoria??

[mark00001]

hey adam whats the highest flowing 3" inlet you have without the ghey tinny sound? (want a deep note sorta like lukey)

[reeceknot]

yeh do any remove that fucking raspy whining noise?

[mark00001]

not with a cannon!.... gotta have a big body (a fair bit bigger than the tip) and resonator.... but yeh i dont want a cannon, i want a large oval/round with a deeper note and i'll chuck on a 4" reso on my 3" sys

[MrBoom]

NIX EXA: PM sent

mark00001: all the oval mufflers have about the same flow capabilities. and all have a deeper tone, and in my opinion sound better than a cannon.

[wingnut]

can you get the thing wereyou can control the volume of the cannon

it's always avertised in hot 4's say you can get it with xforce stuff?

[MrBoom]

yeh, its the XFORCE Varex Muffler..
i can get them, around the $500-700 mark

[Sniper_S]

I know you advertise Australia postage. But are you willing to do NZ postage if there was enough interest?

[StaTiK]

PM him. He will do postage to NZ.

[wingnut]

yeh, its the XFORCE Varex Muffler..
i can get them, around the $500-700 mark
is that in any style and how hard is it to wire up?

[mark00001]

only one style man, cannon, wont be hard to fit at all....... asked about these months ago!

[MrBoom]

Sniper S: i will send worldwide at buyers expense.. no minimum order.. so if you would like one, just PM me if you have any further questions..

Wingnut: they have only made it in one style so far, i believe its a 4.5" straight cut tip, not 100% sure whether its gold seam or seamless, but barely noticeable either way.. and yeh, they are simple to wire up, u can just get an exhaust shop to fit the muffler for you as normal, and just do the wiring yourself and save on labour costs, just run the wire through the boot grommet, and if you have an amp in the back, that should do it for ya.. just needs 12v power.. otherwise take the wire under the carpet to the cigarette lighter or battery etc..

[wingnut]

can you get a deffinate price?

[MrBoom]

as previously said(not sure if you saw, cause we may have posted at the same time).. its just a basic style straight cut 4.5" tip.. not sure whether its gold seam, or seamless.. but in either case, it would be very un-noticeable..

will pretty much look like either of these:
http://www.ozkits.com.au/site/1446035/product/XF0103
http://www.ozkits.com.au/site/1446035/product/XF0110

[Packy]

will be interested in the extractors when i clear my funds up. wont be for a while but i will talk toyou when the time comes.

[wingnut]

what material are the extractors made from?
can you get stainless extractors?

[MrBoom]

mild steel

i dont believe they make SS extractors for ca18det east-west(can never remember the directions lol)???

in either case, bro with a N/A... your talking about half a KW differecne between mild steel and SS... if your lucky!

other than looks, i dont think its good for much else on an NA lol..

[wingnut]

looks is what i want?
what color are they?
can you paint them?

[MrBoom]

turbotec are silver/raw..
hurricane are blue, like pictured on my website.. www.ozkits.com.au

ive had bad experience.. with painting htem, probably cause i didnt prep right lol..
but you can get high temp paint.. but you wont get "chrome" paint..
best you will get is silver, or a colour that matches your car or something..

[T.eXa]

are the twin upswet tips mufflers any good??
and are the extractors the best suited one for ca18de??

[MrBoom]

if the mufflers werent any good, i wouldnt be selling them lol..
do you have any other specific questions about them?
generally if you dont want a loud loud exhaust sound, go for an oval muffler, either any of the twin tips or the oval single tip one.. its alot deeper sound, and alot less drone..

as for extractors, they are designed and built specifically for the exa...

does that answer all your questions about them? if not, please be more specific in what you ask.

[wingnut]

do the extractors come with flex pipe or is that extra
also on igntion dvd they said something about you can get the varex muffler for $399 can you see what you can do?

[MrBoom]

extractors do not come with flex, i can supply at extra cost, PM for more info.. you will need an exhaust shop to fit or help with these anyways, as they are unflanged, and you either need to flange your flex and headers, or you will need to weld direct to flex, but you will still more than likely need to flang the flex to connect to the cat..

as for the varex cannons, i can probably match the $399, but am not going to chase up quotes until someone is genuinly interested with cash ready.

[T.eXa]

all good you practically answered my question.. another question what are the advantages of having a flex than jus a pipe welded togeda to the cat by the exhaust mechanic. and also how much for more a flex pipe. n what wud be a good cat and how much?

[MrBoom]

well a flex will take all the stress off the exhaust system.. without it, ur likely to crack the system at some point..

flex pipe from me will cost you about $75
as for new cats i got(brand is CatCo):
Regular cat - $155
High Flow - $230

ide be going for the highflow, no point wasting money on extractors and labour, and then cheap out on a restricting cat.


PM for any other enquiries please.

[Garry]

MrBoom... i'm looking for a muffler that has a 3 inch intake and is a muffler... I don't want cannon noise... i want quiet. It also has to be straight through/high flow....

put it this way, i was looking at getting a HKS super drager... but they stopped making them now. So something along the lines of that.

how does the mega cannon sound?? is it straight through???

i don't care about size... i just want quiet...

[wingnut]

garry buy a varex muffler!

[MrBoom]

all xforce cannons are straight through..
all of the oval mufflers will achieve what you want.. the mega cannon will be a fair bit quieter than the other cannons..

have a look through, let me know which style ur interested in, and PM me any other questions you have..

[exacyzm]

i cant see where you have hi flow cats....are there any?

[MrBoom]

i havnt re-listed them.. if you want one, or have any questions, PM me..

[Nash]

would you have resonators / hot dog's in 3" available?

[MrBoom]

sure do, PM for further enquiries..

[Safe_Hoon]

can u get catalik converters i need to get a new one preferably high flow

[MrBoom]

lol, man, do you people even read threads anymore or just post?

yes i do sell them, and have said that in previous posts
http://forum.nissanexa.com/showpost.php?p=491276&postcount=33

PM for further enquiries..

[MrBoom]

prices have now been updated

[pee-wee]

the "Twin Upswept Tips" muffler for $200.

question: is it generic? will it provide a different exhaust note? how much posted to 5203(sa)

[jordsnissannx]

hey

is it possible u could get one of the cannons preferrably the 8" body one wit like a 4 or 5" dump tip??????


thanks


jordo