intercooler

[verbacide]

hey gus- any tips on how to install a front mount or bov to an n12 and how do i put a pod filter on?
HELP!!!
cgeerz ben:help:

[85EXABOY]

for the intercoolers if you use 2 inch pipe then go under the front of the car and you will have no problems, my car was ultra low and never had a problem when i had pipes coming from underneath. on the driver side near the headlight there will be a area where you can cut out and fit a pipe through there this is the pipe coming out of the turbo.

do the bov when you do the piping it will be a lot easier.

as for the filter, relocate the AFM and possibly battery and you will get more power. its simple and has been done to death so i wont go into it.

[Android 360]

take a look at n12turbo.com man

[Paul Smith]

The instructions at n12turbo.com for relocating the AFM are poor. If you have trouble understanding them I can email you a much better set of instructions as a WORD document. I will need a genuine email address that allows attachments.

[JeffET]

Hey Paul

Fire that DOC file over to Dave Waldock at n12turbo.com if you found the instructions difficult, then others might too ;)

[Nisman]

do you have aircon?

i didnt want to run my intercooler piping under the front due to the fact that my tow hooks hit the road occasionally.
due to the fact that my aircon didnt work i took it off, i then enlarged the holes in the radiator support thing where the aircon piping used to run.
there was enough room to easily get 2 inch piping through, could have gone 2.5 inch without too much hassle.
i also moved my thermo fans closer to the radiator, this gave me about an inch more room in the front.