REMOVE ADS
+ Reply to Thread
Page 1 of 3 1 2 3 LastLast
Results 1 to 20 of 45

Thread: CA18DE to CA18DET wiring and colors also vacuum

  1. #1
    Conversion 7.0 lfarner has disabled reputation lfarner's Avatar
    Join Date
    Feb 2003
    Age
    33
    Posts
    302

    Post CA18DE to CA18DET wiring and colors also vacuum

    looking around the board, i couldn't find a complete chart on this, just thought it should be here...enjoy

    ca18de harness setup:

    101 102 103 104 105 106 107 108|01 02 03 04 05 06|13 14 15 16 17 18 19 20 21 22|33 34 35 36 37 38 39 40|
    109 110 111 112 113 114 115 116|07 08 09 10 11 12|23 24 25 26 27 28 29 30 31 32|41 42 43 44 45 46 47 48|

    ca18det harness setup:

    101 102 103 104 105 106 107 108|01 02 03 04 05 06 07 08 09 10|0|21 22 23 24 25 26 27 28 29 30|41 42 43 44 45 46 47 48 49 50|
    109 110 111 112 113 114 115 116|11 12 13 14 15 16 17 18 19 20|_|31 32 33 34 35 36 37 38 39 40|51 52 53 54 55 56 57 58 59 60|

    pinouts: thanx hairball

    det/de/color(de loom)/explanation

    1 1 black/red ==Coil 1
    2 2 black/yellow ==Coil 2
    3 8 red/blue ==Coil 3
    5 11 blue ==boost/power control solinoid valve
    6 10 blue/yellow ==A/C relay I neeeds them extra kw's so take it offf!!!!!
    7 3 red/white ==Tacho Drive Output To Auto
    8 ==Variable intake butterfly Control sol.
    10 6 black ==Ground
    11 9 red/white ==Coil 4
    16 4 black/yellow ==ECCS relay (Earth=on)
    17 ---------------------- Injector Pulse relay (for trip computer. Not on exa)
    18 104 white ==fuel pump relay Earth = on
    20 12 black ==ground
    23 28 white ==Knock/Detination sensor
    26 16 black ==AFM pin B Air Flow Meter
    27 15 white ==AFM pin A Check these two AFM pins… they could be backward.. But I think they're right
    28 17 yellow ==Coolant Temp sensor
    29 18 white ==O2 sensor
    30 20 black ==20 +30 Sensor Earth
    32 ---------------------- Check connector: These are for Nissan to hook up their
    33 ---------------------- Check connector: Diagnostic Comp's…. Who needs them?
    37 27 green/yellow ==AFM Pin D
    38 19 white ==TPS potentimeter TPS (throttle Positioning Switch/Sensor)
    41 21 green/black ==CAS 180 deg Crank Angle Sensor
    42 22 green/yellow ==CAS 1 deg inputs
    43 35 green ==Start Signal
    44 36 orange ==Neutral Switch
    45 37 black/white ==Ignition On
    46 41 blue/yellow ==thermo control for AC
    47 ----- ---------------- Check connector
    48 38 white/black ==TPS battery output
    49 47 blue ==Battery from ECCS relay ignition coil relay
    50 40 black ==Ground
    51 31 breen/black ==CAS 180 deg CAS Back up
    52 32 green/yellow ==CAS 1 deg CAS Back up
    53 33 white/blue ==speed sensor
    54 34 red ==TPS idle
    55 --------------------- Ambient Air Temp Sensor None on Exa
    56 --------------------- Auto control. Auto? Yeah right!
    57 44 white/blue ==TPS FULL!!!! the way it should always be!!!!!!!!!
    58 46 black/red ==Battery unswitched
    59 39 blue ==Battery from ECCS relay
    60 48 black ==Ground
    101 101 white/shield ==Injector 1
    103 103 black/shield ==Injector 3
    106 113 yellow/red ==AAC Auxillary Air Control Solinoid valve thingy
    107 107 black ==Injector ground
    108 108 black ==Injector ground
    109 109 black/red ==Battery to/from ECCS relay
    110 110 yellow/shield ==Injector 2
    111 102 orange ==Fuel Pressure Reg.
    112 112 white/blue ==Injector 4
    115 ----------- Heater output for O2 sensor Exa's only have one wire for O2 sensor.
    116 116 black ==Injector Ground

    and here's the vacuum diagram for the kn13 ca18de. i got this from a nissan dealer so all the part numbers are also there. notice the highlighter, i've used this a couple times.
    Attached Images
    1988 Pulsar ca18det + 1988 Pulsar ca18de

  2. #2
    No Idea... KaiShin has a brilliant future KaiShin has a brilliant future KaiShin has a brilliant future KaiShin's Avatar
    Join Date
    Mar 2005
    Age
    28
    Posts
    22,742

    That is awesome!
    Thanks for posting that up!
    This is really useful!

    I <3 Chkn, Bogan, Blood, Packy & Packy's Mum

  3. #3
    Fix It Again Tony Mill3t is someone we respect Mill3t's Avatar
    Join Date
    Jan 2005
    Age
    25
    Posts
    2,109

    Quote Originally Posted by KaiShin
    That is awesome!
    Thanks for posting that up!
    This is really useful!

    I couldn't have said it better myself!

    Finally a good vac line diagram, I have been waiting for one of these
    '01 Kawasaki Ninja ZX12R
    '08 Suzuki GS500F
    '93 Honda CBR600F
    '05 Suzuki DR650SE

    '95 EF Falcon

  4. #4
    Conversion 7.0 lfarner has disabled reputation lfarner's Avatar
    Join Date
    Feb 2003
    Age
    33
    Posts
    302

    if you need a higher res pic, just pm me.

    i had lost it in my infinite papers on the pulsar and found it today!

    glad i can help.
    1988 Pulsar ca18det + 1988 Pulsar ca18de

  5. #5
    EXA/NX Maniac Beatle is well respected Beatle's Avatar
    Join Date
    Oct 2005
    Age
    67
    Posts
    240

    Vacuum Diagram OK

    The Vacuum Hose Diagram that lfarner supplied from a KN13 is great. I have just traced it out on my N13 CA18DE EXA and it is 100% correct.

    What I have said here in 2006 is not correct.

    I now believe the digram NOT to be correct. See new post http://www.nissanexa.com/showthread....AGRAMS-Revised
    Last edited by Beatle; 23rd March 2010 at 02:48 PM.
    The Old Bloke

  6. #6
    Fix It Again Tony Mill3t is someone we respect Mill3t's Avatar
    Join Date
    Jan 2005
    Age
    25
    Posts
    2,109

    I think this should be stickeyd
    '01 Kawasaki Ninja ZX12R
    '08 Suzuki GS500F
    '93 Honda CBR600F
    '05 Suzuki DR650SE

    '95 EF Falcon

  7. #7
    [E][X][A][Q][T][A] DEVILsEXA is known as a rock round here DEVILsEXA's Avatar
    Join Date
    Dec 2002
    Age
    30
    Posts
    12,081

    Ah now that is one fucking awesome vacuume diagram!

    Just remmber thats only for CA18DE though guys. CA16DE has an extra solenoid.

    Also, i dont like Craig (hairballs) writeup and it's got a few problems. Thats where Dattofeind and Mattybaby's writeups stemed from. I've drawn some up but just to lazy to scan em in.

  8. #8
    Medium, but not average guess_whos_who has disabled reputation guess_whos_who's Avatar
    Join Date
    May 2004
    Age
    27
    Posts
    2,519

    can someone find or make a vac diagram like that for a s13 det!

    1988 Nissan Exa - Faster than yours
    S13 CA18DET, Remap, Adjustable cam gears, CA16DE cams, FMIC, HKS EVCIII,
    GTiR Front Brakes - EBC green stuff, N13 Pulsar Rear Discs

  9. #9
    EXA/NX Maniac Beatle is well respected Beatle's Avatar
    Join Date
    Oct 2005
    Age
    67
    Posts
    240

    Vacuum Diagram

    Attached is a version of the Vacuum Diagram that I have tidied-up and re-titled. I modified it from high resolution copy from "1farmer". It should be easier to read. I am going to redo it and add names to the main items, eg "Vacuum Tank and EGR Valve etc.

    That new diagram is now attached. See also new post http://www.nissanexa.com/showthread....AGRAMS-Revised
    Last edited by Beatle; 23rd March 2010 at 02:53 PM.
    The Old Bloke

  10. #10
    Gold Member _tomcat_ is well respected _tomcat_'s Avatar
    Join Date
    Jan 2006
    Age
    25
    Posts
    579

    anyone got a good diagram for the ca16de, other than the crappy one that is in the manual ?

  11. #11
    Phat fabrications s3xyexa06 has a brilliant future s3xyexa06 has a brilliant future s3xyexa06 has a brilliant future s3xyexa06's Avatar
    Join Date
    Apr 2006
    Age
    26
    Posts
    1,783

    can any one get a diagram for the U12 intake setup im not game enuf to go near it because theres so much shit and i want to no wat goes where

    Contact me if u would like custom alloy partscustom intake pipes all sizes, air boxes, engine covers, custom resoviors etc
    **charges apply. nissan exa members receive discount, pics available soon**

    you should give me respect points to go in the hall of fame with the following.. Android 360, statik, M153XA,krikket_nx, bardock 4, T-NEX, Rascal,Wingnut
    high light area above to reveal secret msg
    http://www.fwdboost.com/forum

  12. #12
    Guru Buzz has much to be proud of Buzz has much to be proud of Buzz's Avatar
    Join Date
    Nov 2003
    Age
    29
    Posts
    8,146

    hey jsut wondering y this hasn't been sticked yet? cause i just spent 5 hours lookin for stuff like this... just would make a great help to others..
    Green is not a colour it's a state of mind!!

    ALL YOUR GREEN M&M'S BELONG TO ME
    ShReXa in the making CLICK HERE

  13. #13
    Banned cypress_blaze is a splendid one to behold cypress_blaze is a splendid one to behold cypress_blaze's Avatar
    Join Date
    Mar 2005
    Age
    31
    Posts
    2,723

    packrat will hopefully be at this, give it a go!

  14. #14
    Lancaster Nismo Founder Packrat has disabled reputation
    Join Date
    Dec 2002
    Posts
    1,616

    Noted, I'll take a look, but the ECU pinout isnt what i need, i need the main harness interface...Im going crazy *pulls hair out*
    Rat
    Be proud to be different,

  15. #15
    Guru Safe_Hoon is a name known to all Safe_Hoon is a name known to all Safe_Hoon's Avatar
    Join Date
    Jul 2006
    Age
    26
    Posts
    1,334

    does any one have a diagram of the loom for the det u12 motor

  16. #16
    Banned cypress_blaze is a splendid one to behold cypress_blaze is a splendid one to behold cypress_blaze's Avatar
    Join Date
    Mar 2005
    Age
    31
    Posts
    2,723

    Quote Originally Posted by Packrat View Post
    Noted, I'll take a look, but the ECU pinout isnt what i need, i need the main harness interface...Im going crazy *pulls hair out*
    Rat
    dude. post some pictures of what you have. plugs, wires, entire loom.

  17. #17
    Quote Originally Posted by lfarner View Post
    looking around the board, i couldn't find a complete chart on this, just thought it should be here...enjoy

    ca18de harness setup:

    101 102 103 104 105 106 107 108|01 02 03 04 05 06|13 14 15 16 17 18 19 20 21 22|33 34 35 36 37 38 39 40|
    109 110 111 112 113 114 115 116|07 08 09 10 11 12|23 24 25 26 27 28 29 30 31 32|41 42 43 44 45 46 47 48|

    ca18det harness setup:

    101 102 103 104 105 106 107 108|01 02 03 04 05 06 07 08 09 10|0|21 22 23 24 25 26 27 28 29 30|41 42 43 44 45 46 47 48 49 50|
    109 110 111 112 113 114 115 116|11 12 13 14 15 16 17 18 19 20|_|31 32 33 34 35 36 37 38 39 40|51 52 53 54 55 56 57 58 59 60|

    pinouts: thanx hairball

    det/de/color(de loom)/explanation

    1 1 black/red ==Coil 1
    2 2 black/yellow ==Coil 2
    3 8 red/blue ==Coil 3
    5 11 blue ==boost/power control solinoid valve
    6 10 blue/yellow ==A/C relay I neeeds them extra kw's so take it offf!!!!!
    7 3 red/white ==Tacho Drive Output To Auto
    8 ==Variable intake butterfly Control sol.
    10 6 black ==Ground
    11 9 red/white ==Coil 4
    16 4 black/yellow ==ECCS relay (Earth=on)
    17 ---------------------- Injector Pulse relay (for trip computer. Not on exa)
    18 104 white ==fuel pump relay Earth = on
    20 12 black ==ground
    23 28 white ==Knock/Detination sensor
    26 16 black ==AFM pin B Air Flow Meter
    27 15 white ==AFM pin A Check these two AFM pins… they could be backward.. But I think they're right
    28 17 yellow ==Coolant Temp sensor
    29 18 white ==O2 sensor
    30 20 black ==20 +30 Sensor Earth
    32 ---------------------- Check connector: These are for Nissan to hook up their
    33 ---------------------- Check connector: Diagnostic Comp's…. Who needs them?
    37 27 green/yellow ==AFM Pin D
    38 19 white ==TPS potentimeter TPS (throttle Positioning Switch/Sensor)
    41 21 green/black ==CAS 180 deg Crank Angle Sensor
    42 22 green/yellow ==CAS 1 deg inputs
    43 35 green ==Start Signal
    44 36 orange ==Neutral Switch
    45 37 black/white ==Ignition On
    46 41 blue/yellow ==thermo control for AC
    47 ----- ---------------- Check connector
    48 38 white/black ==TPS battery output
    49 47 blue ==Battery from ECCS relay ignition coil relay
    50 40 black ==Ground
    51 31 breen/black ==CAS 180 deg CAS Back up
    52 32 green/yellow ==CAS 1 deg CAS Back up
    53 33 white/blue ==speed sensor
    54 34 red ==TPS idle
    55 --------------------- Ambient Air Temp Sensor None on Exa
    56 --------------------- Auto control. Auto? Yeah right!
    57 44 white/blue ==TPS FULL!!!! the way it should always be!!!!!!!!!
    58 46 black/red ==Battery unswitched
    59 39 blue ==Battery from ECCS relay
    60 48 black ==Ground
    101 101 white/shield ==Injector 1
    103 103 black/shield ==Injector 3
    106 113 yellow/red ==AAC Auxillary Air Control Solinoid valve thingy
    107 107 black ==Injector ground
    108 108 black ==Injector ground
    109 109 black/red ==Battery to/from ECCS relay
    110 110 yellow/shield ==Injector 2
    111 102 orange ==Fuel Pressure Reg.
    112 112 white/blue ==Injector 4
    115 ----------- Heater output for O2 sensor Exa's only have one wire for O2 sensor.
    116 116 black ==Injector Ground

    and here's the vacuum diagram for the kn13 ca18de. i got this from a nissan dealer so all the part numbers are also there. notice the highlighter, i've used this a couple times.

    their was 2 wires i found differant this was very uselfull tho

    their was a wire that was ment to be black n red it was actually brown
    then their was another one was ment to be orange it was also brown

    then at the end i had all my wires in the DET plug but yet i still had about 8 or so wires going nowhere
    on total i only had to cut 1 wire in the whole lot and the ecu site in actory position
    Ahhhh shit he owns a nissan again. Bye bye monies

    RB25DET NEO powered GU patrol.

  18. #18
    EXA/NX Maniac capitalgainz is very helpful round here capitalgainz's Avatar
    Join Date
    Jun 2008
    Age
    27
    Posts
    117

    all the diagras can be sort at nissan dealers go in and ask for the diagram you need they ussually can help you i asked for the diagram for the vac lines for ca18det and the turbo/manifold diagrams and they hooked me up
    fuck the 1/4 mile slide your ride !!!!!!!!!!hell yeah!!!?!!!
    i dont have an anger problem, i get pissed off so you get pissed on ..... no problem

  19. #19
    Club Member Serge has disabled reputation Serge's Avatar
    Join Date
    Oct 2005
    Age
    28
    Posts
    428

    This is to adapt the ca18de harness to work with a ca18det ECU correct?

    Whats needed for the ca18det wiring harness to be adapted to an EXA?

  20. #20
    if you want the s13 loom you have to change a shitload more things and the ECU will only be able to reach as far as just behind your dash as thats where my pulsar's ECU sits but i did my exa correctly and it sits under the passenger seat where they ment to
    Ahhhh shit he owns a nissan again. Bye bye monies

    RB25DET NEO powered GU patrol.

+ Reply to Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts