REMOVE ADS
+ Reply to Thread
Results 1 to 3 of 3

Thread: Turbo to manifold

  1. #1
    Not so Newbie Chris Johnston is very helpful round here
    Join Date
    Jul 2012
    Posts
    30

    Turbo to manifold

    Hi guys,

    n12 Exa where the turbo bolts to the manifold, I have bolts come off and come loose, how to fix them so this doesn't happen

    Cheers,
    Chris

  2. #2
    Newbie iron angel is very helpful round here
    Join Date
    Jun 2013
    Age
    28
    Posts
    3

    hi chris.

    im not an expert(yet)got my n12 bout a week ago but i would say u wanna do it right yeh¿get 4 new studs with washers and nuts.make sure your thread is clean on the inside on your manifold.then take your new studs and put locktite on the short end you screw in the manifold.the rest is pretty straight forward you slap on your turbo over y the 4 new studs.ps make sure you have a gasket or fire gum on your manifold before you put your turbo back to prevent your exhaust gases from excaping between your manifold nd turbo.ok so you got your turbo refitted.now you put your 4 new washers and then screw your nuts back on the studs with some locktite aswell.just a drop or 2 will do coz you do want to loosen them oneday i believe.hope you found this helpfull..im a 1st year apprentice at nissan south africa

  3. #3
    Sounds about right.

    Sam
    Member of: Team Glued Motor

    #1 Street N12 in Aus: 13.20 @ 104mph
    6.75 @ 216mph on my bike
    visit: www.parkerdragracing.com for all the latest news

+ Reply to Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts